Ωράριο λειτουργίας ⏤ Δευτέρα - Παρασκευή 08:00 - 17:00

Teltonika RUTX50 5G Router

Teltonika RUTX50 5G Router 4G/5G  LTE
Mobile module5G Sub-6Ghz SA/NSA 2.1/3.3Gbps DL (4x4 MIMO), 900/600 Mbps UL (2x2); 4G (LTE) – LTE Cat 20 2.0Gbps DL, 200Mbps UL; 3G – 42 Mbps DL, 5.76Mbps UL
StatusSignal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP Bytes sent/received, connected band, IMSI, ICCID.
SMS/CallSMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, Call utilities
USSDSupports sending and reading Unstructured Supplementary Service Data messages
Black/White listOperator black/white list
Band managementBand lock, Used band status display
Bridge modeDirect connection (bridge) between mobile ISP and device on LAN
PassthroughGateway assigns its mobile WAN IP address to another device on LAN
Multiple PDNPossibility to use different PDNs for multiple network access and services
Wireless mode802.11b/g/n/ac Wave 2 (WiFi 5) with data transmission rates of up to 867 Mbps (Dual Band, MU-MIMO), 802.11r fast transition, Access Point (AP), Station (STA)
WiFi securityWPA3-EAP, WPA3-SAE, WPA2-Enterprise-PEAP, WPA2-PSK, WEP; AES-CCMP, TKIP, Auto Cipher modes, client separation
ESSIDESSID stealth mode
WiFi usersUp to 150 simultaneous connections
Wireless HotspotCaptive portal (Hotspot), internal/external Radius server, built-in customizable landing page
Wireless mesh/roamingWireless mesh (802.11s), fast roaming (802.11r)
WAN1 x WAN port (can be configured as LAN) 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover
LAN4 x RJ45 port, 10/100/1000 Mbps, supports auto MDI/MDIX crossover
Network protocolsTCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SMTP, SSL v3, TLS, PPP, PPPoE, SSH, DHCP, SNMP, MQTT, Wake on LAN (WOL)
RoutingStatic routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP)
Connection monitoringPing Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection
FirewallPort forwards, traffic rules, custom rules
DHCPStatic and dynamic IP allocation
DDNSSupported >25 service providers, others can be configured manually
SSHFSPossibility to mount remote file system via SSH protocol
AuthenticationPre-shared key, digital certificates, X.509 certificates
FirewallPre-configured firewall rules can be enabled via the WebUI, unlimited firewall configuration via CLI; NAT; NAT-T
Attack preventionDDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention ( SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
VLANPort and tag-based VLAN separation
Mobile quota controlSet up custom data limits for SIM card
WEB filterBlacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only
Access controlFlexible access control of TCP, UDP, ICMP packets, MAC address filter
OpenVPNMultiple clients and a server can run simultaneously, 12 encryption methods
GRE tunnelGRE Tunnel
IPsecIKEv1, IKEv2, supports up to 5 x VPN IPsec tunnels (instances), with 5 encryption methods (DES, 3DES, AES128, AES192, AES256)
SSTPSSTP client instance support
STUNNELProxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code
DMVPNMethod of building scalable IPsec VPNs
PPTP, L2TPClient/Server services can run simultaneously, L2TPv3 support
WireGuardWireGuard VPN client and server support
ZeroTierZeroTier VPN
Modbus TCP Slave
ID filteringRespond to one ID in range [1;255] or any
Allow remote accessAllow access through WAN
Custom registersMODBUS TCP custom register block, which allows to read/write to a file inside the router, and can be used to extend MODBUS TCP slave functionality
Modbus TCP Master
Supported functions01, 02, 03, 04, 05, 06, 15, 16
Supported data formats8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII
MQTT Gateway
GatewayAllows sending commands and receiving data from MODBUS Master through the MQTT broker
Supported modesTCP Master, DNP3 Outstation
Data To Server
ProtocolsHTTP(S), MQTT, Azure MQTT, Kinesis
IoT Platforms
Clouds of thingsAllows monitoring of: Device data, Mobile data, Network info, Availability
ThingWorxAllows monitoring of: WAN Type, WAN IP Mobile Operator Name, Mobile Signal Strength, Mobile Network Type
CumulocityAllows monitoring of: Device Model, Revision and Serial Number, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength, WAN Type and IP
Azure IoT HubCan send device IP, Number of bytes send/received/ 3G connection state, Network link state, IMEI, ICCID, Model, Manufacturer, Serial, Revision, IMSI, Sim State, PIN state, GSM signal, WCDMA RSCP, WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator number, Connection type, Temperature, PIN count to Azure IoT Hub server
WEB UIHTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel log
FOTAFirmware update from server, automatic notification
SSHSSH (v1, v2)
SMSSMS status, SMS configuration, send/read SMS via HTTP POST/GET
CALLReboot, Status, Mobile data on/off, Output on/off
TR-069OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem
MQTTMQTT Broker, MQTT publisher
SNMPSNMP (v1, v2, v3), SNMP trap
MODBUSMODBUS TCP status/control
RMSTeltonika Remote Management System (RMS)
CPUQuad-core ARM Cortex A7, 717 MHz
RAM256 MB (100 MB available for userspace)
FLASH storage256 MB (80 MB available for userspace)
WEB UIUpdate FW from file, check FW on server, configuration profiles, configuration backup
RMSUpdate FW/configuration for multiple devices at once
Keep settingsUpdate FW without losing current configuration
Operating systemRutOS (OpenWrt based Linux OS)
Supported languagesBusybox shell, Lua, C, C++
Development toolsSDK package with build environment provided
Location Tracking
GNSSGPS, GLONASS, BeiDou, Galileo and QZSS
CoordinatesGNSS coordinates via WebUI, SMS, TAVL, RMS
Server softwareSupports server software: TAVL, RMS
GeofencingMultiple configurable geofence zones
Data rateUSB 2.0
ApplicationsSamba share, USB-to-serial, Modbus gateway
External devicesPossibility to connect external HDD, flash drive, additional modem, printer
Storage formatsFAT, FAT32, NTFS
Input / Output
Input1 x Digital Input, 0 - 6 V detected as logic low, 8 - 30 V detected as logic high
Output1 x Digital Output, Open collector output, max output 30 V, 300 mA
EventsSMS, Email, RMS
I/O jugglerAllows setting certain I/O conditions to initiate event
Connector4-pin industrial DC power socket
Input voltage range9 – 50 VDC, reverse polarity protection, surge protection >51 VDC 10us max
PoE (passive)Mode B, LAN1 Port, 9 - 50 VDC
Power consumptionIdle: <4 W, Max: <18 W
Ethernet5 x RJ45 ports, 10/100/1000 Mbps
I/Os1 x Digital Input, 1 x Digital Output on 4-pin power connector
Status LEDs3 x connection status LEDs, 3 x connection strength LEDs, 10 x Ethernet port status LEDs, 4 x WAN status LEDs, 1x Power LED, 2 x 2.4G and 5G WiFi LEDs
SIM2 x SIM slot (Mini SIM – 2FF), 1.8 V/3 V
Power1 x 4-pin DC power connector
Antennas4 x SMA for Mobile, 2 x RP-SMA for WiFi, 1 x SMA for GNSS
USB1 x USB A port for external devices
ResetReboot/User default reset/Factory reset button
Other1 x Grounding screw
Casing materialAluminum housing
Dimensions (W x H x D)132 x 44.2 x 95.1 mm
Weight533 g
Mounting optionsDIN rail (can be mounted on two sides), flat surface placement
Operating Environment
Operating temperature-40 °C to 75 °C
Operating humidity10 % to 90 % non-condensing
Ingress Protection RatingIP30

Teltonika RUTX50 Industrial 5G Router

Το RUTX50 είναι ο βιομηχανικός δρομολογητής πολλαπλών δικτύων που προστατεύεται από το μέλλον, που προσφέρει κινητή επικοινωνία 5G για εφαρμογές υψηλής ταχύτητας και μεγάλης έκτασης δεδομένων. Η κινητή επικοινωνία με δύο SIM 5G σε συνδυασμό με 5 θύρες Ethernet Gigabit και Wi-Fi διπλής ζώνης επιτρέπει την αξιόπιστη εξαιρετικά χαμηλή λανθάνουσα μεταφορά δεδομένων. Η ισχύς της τεχνολογίας 5G, σε συνδυασμό με ένα ευρύ φάσμα διεπαφών και χαρακτηριστικών βιομηχανικού υλικού, εξασφαλίζει προσαρμοστικότητα για μελλοντικές αναβαθμίσεις και επεκτάσεις. Το RUTX50 συνοδεύεται από το RutOS, το οποίο παρέχει προηγμένα χαρακτηριστικά ασφαλείας και εξειδικευμένα βιομηχανικά πρωτόκολλα για ένα ευρύ φάσμα σενάρια επαγγελματικών εφαρμογών και είναι συμβατό με το Σύστημα Απομακρυσμένης Διαχείρισης (RMS), για βελτιστοποιημένες δυνατότητες απομακρυσμένης διαχείρισης και παρακολούθησης μεγάλων στόλων συσκευών.

  • Views: 518
  • Κωδικός AIC: 4406
  • SKU: 4406
  • Διαθεσιμότητα: Παράδοση έως 30 ημέρες
  • 700,60€
  • Χωρίς ΦΠΑ: 565,00€

Εκτίμηση Μεταφορικών

Άμεση Αποστολή

Οι παραγγελίες αποστέλλονται αυθημερόν, βάσει διαθεσιμότητας και εφόσον έχουν καταχωρηθεί έως τις 12:00 μμ εργάσιμης ημέρας


Για ερωτήσεις διαθεσιμότητας μεγάλης ποσότητας, καλέστε στο 210-2209582